PVC End Cap

JUNNUO is a professional supplier of PVC pipes, pipe fittings and valves, which are widely used in water supply, chemical industry, water treatment, petroleum, environmental protection, pharmaceutical and other fields.

"Quality first, customer first" is our principle of company. Your satisfaction is our eternal pursuit. We strictly accordance with ISO4427, ISO9001 quality system to arrange production. With first-class raw materials, strict workshop, laboratory quality control and a variety of professional testing equipment to provide customers with quality products.

JUNNUO can supply various PVC fittings include: flange, stub end, equal tee, reducing tee, ball valve, coupling, reducer, end cap, 45 degree elbow, 90 degree elbow, etc.

PVC End Cap refers to a pipe fitting used in a pipe system, usually used to close holes on pipes or at the end of PVC Pipes, to seal and prevent debris from entering. Made of PVC material, it is corrosion-resistant, wear-resistant and heat-resistant. Its main function is to prevent impurities, dust and other substances from entering the end of the pipe to ensure the normal operation of the pipe, and provide a convenient way to disassemble and repair the pipe.

Function

1. Seal the pipe: seal the end or hole of the pipe to prevent leakage of liquid, gas or solid substances;

2. Protect the pipe: When it is damaged, corroded, etc. by the outside world, the pipe cap can protect the pipe;

3. Convenient maintenance: The pipe cap can be easily removed or installed when the pipe is maintained or repaired.

Installation precautions

1. Clean the pipe and PVC End Cap: First, you need to clean the debris and oil on the surface of the pipe and End Cap to ensure that the surface of the pipe and End Cap is clean.

2. Adjust the size of the End Cap: Confirm whether the size of the End Cap is appropriate.

3. Apply sealant: Apply a certain amount of sealant on the surface of the End Cap and the pipe to ensure that the End Cap and the end of the pipe can be completely sealed.

4. Install the pipe cap: Cover the pipe hole with the adjusted pipe cap and tighten it to fix it.

As an important part of the pipeline system, the correct installation and use of PVC End Cap is of great significance to the normal operation and safety of the pipeline system.

PVC pipe fittings are widely used for water supply, petroleum, gas, chemical industry, water treatment, environmental protection, pharmaceutical and other fields, with the feature as follow:

• Light weight: Each unit weight is only 1/6 of cast iron pipe, so it is very convenient to transport.
• High strength: Could bear 45Mpa at maximum.
• Low resistance: Inner wall of the pipes are smooth, no dirt and no blocking. Could reduce 30% loss than cast iron pipe.
• Corrosion resistance: With good high acid resistance, alkali resistance, chemical resistance and electrochemical resistance, thus, there will be no corrosion in the process of use.
• Easy to installation: Use glue connection and flange connection, which will be convenient to installation and seal reliable.
• Long service life: The maintenance time could up to 50 years under normal working pressure.
• Low cost: Low transportation and installation cost, total project cost will 30-40% less than cast iron pipe.
• Non-toxic and sanitary: PVC fittings confirm to the standards of drinking water, and there is no secondary pollution during water transportation.