HDPE Electrofusion Reducing Tee

HDPE Electrofusion Reducing Tee‌ is a special three-way pipe fitting, the main function is to connect and divide. ‌ For example, when fluid flows from one pipe into another pipe, it may be necessary to change the direction of flow. By selecting the appropriate tee fitting, the direction of the fluid can be changed to the desired Angle and direction.

Advantages and characteristics

1.‌ easy installation ‌ : HDPE Electrofusion Reducing Tee to realize the connection of the pipeline through electric heating, only need to put the electric fusion joint on the main pipe, the installation can be completed through electric heating, greatly simplifying the installation process.

2.‌ high connection reliability ‌ : HDPE electric melting reducing tee connection through the electric melting connection, the strength of the connection is higher than the strength of the pipeline itself, to ensure the reliability of the connection, to avoid the leakage of the medium, thus ensuring the safe operation of the pipeline system.

3.‌ strong corrosion resistance ‌ : HDPE material has excellent corrosion resistance, can resist the corrosion of most of the domestic and industrial chemicals, to ensure the long-term stable operation of the pipeline system.

‌4. Long service life ‌ : HDPE Electrofusion Reducing Tee is designed for long service life and good durability, which can meet the needs of long-term use, reduce the frequency of replacement and maintenance, and reduce the use cost.

The electrofusion HDPE fittings refers to a plastic (polyethylene) pipe fitting that can be melted to reach the connection by the current generated by the current. The PE pipe fitting is connected by electrofusion, and the interface strength is higher than that of the pipe itself, and the connection is very strong.

JUNNUO can supply various electrofusion HDPE fittings from DN 20 mm to DN 630 mm. HDPE fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degree, elbow 90 degree, etc.  Can be customized according to requirements, our electrofusion HDPE fittings are made from high quality PE80 or PE100 raw materials, mainly used in water supply, oil and gas pipeline systems.

HDPE fused fittings are fully compliant with ISO4427/ AS/NZS 4130/BS EN 12201/ SABS standards.

• Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
• Corrosion resistance: PE is an inert material that is resistant to various chemical media.
• PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
• High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
• Excellent resistance to rapid crack propagation (RCP).
• Excellent flexibility and scratch resistance.
• Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
• Very convenient construction and installation.
• Low system cost and reduced maintenance costs can greatly reduce project costs.
• Long service life: The buried PE pipe fittings are used normally for more than 70 years.
• PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.