HDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer Coupling
HDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer CouplingHDPE Electrofusion Reducer Coupling

HDPE Electrofusion Reducer Coupling

HDPE electrofusion reducer coupling is suitable for water, petroleum and natural gas. It is made of high quality PE80 or PE100 material. The quality is guaranteed for 30 years. The most competitive wholesale price can provide regular size inventory and prompt delivery. For more information about HDPE electrofusion equal tee, please contact us!
1.Size: DN25-500 mm (can be customized).
2.Pressure rating: SDR11-PN16 bar, SDR13.6-PN12.5 bar, SDR17-PN10 bar, SDR21-PN6 bar, SDR26-PN6 bar.
3.Raw materials: PE80 or PE100 materials.
4.Supply capacity: 3 × 40 feet per week container.
5.Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 certification.

Description

The electrofusion HDPE fittings refers to a plastic (polyethylene) pipe fitting that can be melted to reach the connection by the current generated by the current. The PE pipe fitting is connected by electrofusion, and the interface strength is higher than that of the pipe itself, and the connection is very strong.

 

Products Name

HDPE Electrofusion Reducer Coupling

Sizes

DN 25-500 mm

Pressure Rate

SDR11, SDR13.6, SDR17, SDR21, SDR26, SDR33, SDR41

Material

High quality PE80 or PE100 raw materials

Colour

Available in black or yellow, or according to customer requirements

Standard

ISO4427 / AS / NZS 4130 / BS EN 12201 / SABS standard

Sample

Sample available

 

Specifications

JUNNUO Pipeline

D×d D1 L1 d1 I1 L
32×25 47 41 38 40 88
40×32 57 43 48 41 93
50×32 67 49 48 41 100
50×40 67 49 57 43 100
63×32 87 50 48 41 115
63×40 87 50 57 43 115
63×50 87 50 67 48 115
75×63 96 65 82 59 133
90×63 115 70 87 58 141
110×63 140 68 87 58 161
110×90 140 68 115 74 161
160×90 203 81 115 70 211
160×110 203 81 140 74 210
200×110 246 110 140 74 250
200×160 246 110 198 95 245
250×160 310 129 198 95 284
250×200 310 129 246 110 276

Advantages

JUNNUO can supply various electrofusion HDPE fittings from DN 20 mm to DN 630 mm. HDPE fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degree, elbow 90 degree, etc.  Can be customized according to requirements, our electrofusion HDPE fittings are made from high quality PE80 or PE100 raw materials, mainly used in water supply, oil and gas pipeline systems.

HDPE fused fittings are fully compliant with ISO4427/ AS/NZS 4130/BS EN 12201/ SABS standards.

  • Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
  • Corrosion resistance: PE is an inert material that is resistant to various chemical media.
  • PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
  • High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
  • Excellent resistance to rapid crack propagation (RCP).
  • Excellent flexibility and scratch resistance.
  • Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
  • Very convenient construction and installation.
  • Low system cost and reduced maintenance costs can greatly reduce project costs.
  • Long service life: The buried PE pipe fittings are used normally for more than 70 years.
  • PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.

INQUIRY