Injection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer tee
Injection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer teeInjection moulded butt fusion HDPE Reducer tee

Injection moulded butt fusion HDPE Reducer tee

Injection moulded butt fusion HDPE Reducer tee for HDPE pipes, high quality to be warranted with 30 years, the most competitive wholesale prices, STOCK AVAILABLE for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion Reducer Tee!
1.Size: DN75-630mm (Can Be Customized).
2.Pressure Rating: SDR11-PN16 Bar, SDR13.6-PN12.5 Bar, SDR17-PN10 Bar, SDR21-PN6 Bar, SDR26-PN6 Bar.
3.Raw Materials: High Quality PE80 Or PE100 Raw Materials.
4.Supply Capacity: 3 × 40ft Container Per Week.
5.Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 Certification.

Description

Butt welding and fabricated methods are the most common method of joining polyethylene pipes of various diameters for the moments. The ends of the polyethylene tubes are heated and connected together under pressure from specialized equipment to form a continuous "leak-proof" conduit. Butt fusion pipes is as strong as the pipe itself and has the same life expectancy.


Brief Detail:


Product name

Injection moulded butt fusion HDPE Reducer tee

Sizes available

DN75-630mm

SDR rating

SDR11, SDR13.6, SDR17, SDR21, SDR26, SDR33, SDR41

Material

Top quality new PE80 or PE100 raw material

Colors available

Black or blue, or as per request

Standards follow to

ISO4427/ AS/ NZS 4130/ BS EN 12201/ SABS standard

Samples available

Available

Specifications

JUNNUO Pipeline

d1×d2 L1 L2 H L
90×50 81 57 126 260
90×63 81 65 134 274
100×50 85 57 136 269
110×63 85 65 145 283
110×90 83 80 155 395
160×90 100 80 180 320
160×110 100 83 185 345
200×110 113 83 205 360
200×160 113 100 230 413
250×110 130 83 230 455
250×160 130 100 245 450
250×200 130 113 250 545
315×160 150 100 285 510
315×200 150 113 296 630
315×250 150 130 324 635

Advantages

JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN630mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.

HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.

  • Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
  • Corrosion resistance: PE is an inert material that is resistant to various chemical media.
  • PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
  • High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
  • Excellent resistance to rapid crack propagation (RCP).
  • Excellent flexibility and scratch resistance.
  • Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
  • Very convenient construction and installation.
  • Low system cost and reduced maintenance costs can greatly reduce project costs.
  • Long service life: The buried PE pipe fittings are used normally for more than 70 years.
  • PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.

INQUIRY