HDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree Elbow
HDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree ElbowHDPE Butt Fusion 90 Degree Elbow

HDPE Butt Fusion 90 Degree Elbow

Injection moulded HDPE Butt Fusion 90 Degree Elbow for HDPE pipes, available 63-800mm in SDR11 & SDR17, high quality to be warranted with 15 years, the most competitive wholesale prices, STOCK AVAILABLE for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion 90 Degree elbow!
1. Size: DN75-800mm (Can Be Customized).
2. Pressure Rating: SDR11-PN16 Bar, SDR13.6-PN12.5 Bar, SDR17-PN10 Bar, SDR21-PN6 Bar, SDR26-PN6 Bar.
3. Raw Materials: High Quality PE80 Or PE100 Raw Materials.
4. Supply Capacity: 3 × 40ft Container Per Week.
5. Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 Certification.

Description

Butt welding and fabricated methods are the most common method of joining polyethylene pipes of various diameters for the moments. The ends of the polyethylene tubes are heated and connected together under pressure from specialized equipment to form a continuous "leak-proof" conduit. Butt fusion pipes is as strong as the pipe itself and has the same life expectancy.


Brief Detail:

Product name

HDPE Butt Fusion 90 Degree Elbow

Sizes available

DN75-800mm

SDR rating

SDR11, SDR13.6, SDR17, SDR21, SDR26, SDR33, SDR41

Material

Top quality new PE80 or PE100 raw material

Colors available

Black or blue, or as per request

Standards follow to

ISO4427/ AS/ NZS 4130/ BS EN 12201/ SABS standard

Samples available

Available

Specifications

JUNNUO Pipeline

d e(SDR11) e(SDR17) L L1
63 5.8 117 64
90 8.2 5.4 145 80
110 10 6.6 154 84
160 14.6 9.5 206 99
200 18.2 11.9 231 114
225 20.5 13.4 255 121
250 22.7 14.8 279 131
315 28.6 18.7 336 152
355 32.2 21.1 373 167
400 36.4 23.7 480 275
450 40.9 25.6 525 285

Advantages

JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN630mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.

HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.

  • Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
  • Corrosion resistance: PE is an inert material that is resistant to various chemical media.
  • PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
  • High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
  • Excellent resistance to rapid crack propagation (RCP).
  • Excellent flexibility and scratch resistance.
  • Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
  • Very convenient construction and installation.
  • Low system cost and reduced maintenance costs can greatly reduce project costs.
  • Long service life: The buried PE pipe fittings are used normally for more than 70 years.
  • PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.

INQUIRY