HDPE End CapHDPE End CapHDPE End CapHDPE End Cap
HDPE End CapHDPE End CapHDPE End CapHDPE End Cap

HDPE End Cap

Injection moulded HDPE butt fusion End Cap/Pipe Cap for HDPE pipes, high quality to be warranted with 15 years, the most competitive wholesale prices, STOCK AVAILABLE for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion Cross Fittings!

1.Size: DN75-630mm (Can Be Customized)

2.Pressure Rating: SDR11-PN16 Bar, SDR13.6-PN12.5 Bar, SDR17-PN10 Bar, SDR21-PN6 Bar, SDR26-PN6 Bar

3.Raw Materials: High Quality PE80 Or PE100 Raw Materials

4.Supply Capacity: 3 × 40ft Container Per Week

5.Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 Certification


Butt welding and fabricated methods are the most common method of joining polyethylene pipes of various diameters for the moments. The ends of the polyethylene tubes are heated and connected together under pressure from specialized equipment to form a continuous "leak-proof" conduit. Butt fusion pipes is as strong as the pipe itself and has the same life expectancy.

Brief Detail:

Product name

HDPE butt fusion reducer

Sizes available


SDR rating

SDR11, SDR13.6, SDR17, SDR21, SDR26, SDR33, SDR41


Top quality new PE80 or PE100 raw material

Colors available

Black or blue, or as per request

Standards follow to

ISO4427/ AS/ NZS 4130/ BS EN 12201/ SABS standard

Samples available



JUNNUO Pipeline

d e(SDR11) e(SDR17) e(SDR17.6) L1 L
32 3 44 60
40 3.7 49 65
50 4.6 55 75
63 5.8 67 90
75 6.8 4.5 4.3 70 105
90 8.2 5.4 5.2 79 124
110 10 6.6 6.3 82 137
125 11.4 7.4 7.1 87 149
140 12.7 8.3 8 92 162
160 14.6 9.5 9.1 98 178
180 16.4 10.7 10.3 105 195
200 18.2 11.9 11.4 112 212
225 20.5 13.4 12.8 120 232
250 22.7 14.8 14.2 130 255
315 28.6 18.7 17.9 150 307
355 32.2 21.1 20.2 165 342


JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN630mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.

HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.

  • Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
  • Corrosion resistance: PE is an inert material that is resistant to various chemical media.
  • PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
  • High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
  • Excellent resistance to rapid crack propagation (RCP).
  • Excellent flexibility and scratch resistance.
  • Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
  • Very convenient construction and installation.
  • Low system cost and reduced maintenance costs can greatly reduce project costs.
  • Long service life: The buried PE pipe fittings are used normally for more than 70 years.
  • PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.