Steel Backing RingsSteel Backing RingsSteel Backing RingsSteel Backing Rings
Steel Backing RingsSteel Backing RingsSteel Backing RingsSteel Backing Rings

Steel Backing Rings

Steel backing rings from 63-1200mm in PN16 & PN10, customized standard & dimension available, carbon steel & stainless steel material for choice, high quality with the most competitive wholesale price. Contact us freely for more details of the steel backing rings from PUHUI!

1.Size: DN63-1200mm (Can Be Customized)

2.Pressure Rating: SDR11-PN16 Bar, SDR13.6-PN12.5 Bar, SDR17-PN10 Bar, SDR21-PN6 Bar, SDR26-PN6 Bar

3.Raw Materials: High Quality PE80 Or PE100 Raw Materials

4.Supply Capacity: 3 × 40ft Container Per Week

5.Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 Certification

Description

The electrofusion HDPE fittings refers to a plastic (polyethylene) pipe fitting that can be melted to reach the connection by the current generated by the current. The PE pipe fitting is connected by electrofusion, and the interface strength is higher than that of the pipe itself, and the connection is very strong.


Product name

Steel Backing Rings

Sizes available

DN63-1200mm

Pressure Rating

SDR11,SDR13.6,SDR17,SDR21,SDR26,SDR33, SDR41

Material used

Carbon steel or stainless steel

Surface finish

Galvanized, nylon coated, or original with anti-rust oil 

Standard

Customized

Samples available

available

Specifications

Features:

1. Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never scale, which can effectively improve water quality.

2. Corrosion resistance: PE is an inert material that is resistant to various chemical media.

3. PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.

4. High toughness: The elongation at break of PE pipe fittings is generally above 500%. For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.

5. Excellent resistance to rapid crack propagation (RCP).

6. Excellent flexibility and scratch resistance.

7. Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.

8. Very convenient construction and installation.

9. Low system cost and reduced maintenance costs can greatly reduce project costs.

10. Long service life: The buried PE pipe fittings are used normally for more than 70 years.

11. PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.

Advantages

JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN1200 mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.

HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.

INQUIRY