HDPE Stub FlangeHDPE Stub FlangeHDPE Stub FlangeHDPE Stub Flange
HDPE Stub FlangeHDPE Stub FlangeHDPE Stub FlangeHDPE Stub Flange

HDPE Stub Flange

Injection moulded HDPE Stub Flange / Stub End / Flange Adaptor for HDPE pipes, available 63-1200mm in different diameters, high quality to be warranted with 30 years, the most competitive wholesale prices, STOCK AVAILABLE for regular sizes, prompt delivery available. Contact us freely if you are interested in our HDPE stub flanges!

1.Size: DN75-630mm (Can Be Customized)

2.Pressure Rating: SDR11-PN16 Bar, SDR13.6-PN12.5 Bar, SDR17-PN10 Bar, SDR21-PN6 Bar, SDR26-PN6 Bar

3.Raw Materials: High Quality PE80 Or PE100 Raw Materials

4.Supply Capacity: 3 × 40ft Container Per Week.

5.Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 Certificati

Description

The electrofusion HDPE fittings refers to a plastic (polyethylene) pipe fitting that can be melted to reach the connection by the current generated by the current. The PE pipe fitting is connected by electrofusion, and the interface strength is higher than that of the pipe itself, and the connection is very strong.


Product name

HDPE Stub Flange / Stub End / Flange Adaptor

Sizes available

DN63-1200mm

SDR ratings

SDR11,SDR13.6,SDR17,SDR21,SDR26,SDR33, SDR41

Material

Top quality virgin PE80 or PE100 raw material

Colors available

Black or blue, or as per request

Standards

SO4427/ AS/ NZS 4130/ BS EN 12201/ SABS standard

Samples available

available

Specifications

JUNNUO Pipeline

d D4 e L1 L D5 t
50 88 4.6 ≧55 86 59 ≧12
63 102 5.8 ≧63 96 75 ≧14
75 122 6.8 ≧70 110 86 ≧16
90 138 8.2 ≧79 127 105 ≧17
110 158 10 ≧82 127 125 ≧18
125 158 11.4 ≧87 130 132 ≧18
140 188 12.7 ≧92 142 150 ≧25
160 212 14.6 ≧98 167 175 ≧25
180 212 16.4 ≧105 159 180 ≧28
200 268 18.2 ≧112 170 218 ≧31
225 268 20.5 ≧120 176 235 ≧32
250 320 22.7 ≧129 194 270 ≧35
280 320 25.4 ≧139 210 285 ≧35
315 370 28.6 ≧150 227 325 ≧35
355 430 32.3 ≧164 224 373 ≧39
400 482 36.4 ≧179 250 426 ≧40
450 530 40.9 ≧195 280 475 ≧53
500 585 45.5 ≧212 302 530 ≧55
560 645 50.9 ≧235 315 615 ≧55
630 690 57.3 ≧255 340 642 ≧57
710 800 64.5 ≧190 275 737 ≧57
800 905 72.6 ≧150 240 840 ≧60
900 1005 53.3 ≧220 330 944 ≧60
1000 1100 59.3 ≧260 395 1047 ≧65
1200 1330 57.2 ≧260 400 1245 ≧70

Advantages

JUNNUO can supply various sizes HDPE butt welding fittings from DN75mm to DN1200 mm. HDPE butt welding fittings include: flange, equal-diameter tee, reducer tee, ball valve, coupling, elbow 45 degrees, Elbow 90 degrees and so on. Can be customized according to requirements, our HDPE fittings are high quality new and unused PE80 or PE100 raw materials, mainly used in HDPE water, oil and gas piping systems.

HDPE butt welding fittings are fully compliant with ISO4427/AS/NZS 4130/BS EN 12201/SABS standards.

  • Non-toxic, hygienic: PE pipe fittings are non-toxic and odorless. After strict health monitoring, they are green building materials and never produce scale, which can effectively improve water quality.
  • Corrosion resistance: PE is an inert material that is resistant to various chemical media.
  • PE pipe fittings are connected by electrofusion, and the interface strength is higher than the pipe itself.
  • High toughness: The elongation at break of PE pipe fittings is generally above 500%. . For the uneven settlement of the foundation, it has strong adaptability and good seismic performance.
  • Excellent resistance to rapid crack propagation (RCP).
  • Excellent flexibility and scratch resistance.
  • Good wear resistance, low wall friction coefficient, small flow resistance, strong conveying capacity.
  • Very convenient construction and installation.
  • Low system cost and reduced maintenance costs can greatly reduce project costs.
  • Long service life: The buried PE pipe fittings are used normally for more than 70 years.
  • PE accessories can be reused, fully in line with the advocacy of efficient environmental protection.

INQUIRY