Short Description:
Clamp Saddle for HDPE pipe, available 25-250mm in PN10, high quality warranted with 15 years, competitive wholesale prices, prompt delivery available. Contact us for more details of Clamp Saddle!
1. Size: DN20-110mm (can be customized)
2. Pressure rating: PN16 bars for 20-63mm, PN10 bars for 75-110mm
3. Raw materials: high quality PP-B raw materials
4. Supply capacity: 3 × 40 feet per week container:
5. Certificate: ISO 14001, ISO 9001, OHSAS 18001, CE BS EN 12001 certification
HDPE clamp saddle is mainly used as a reinforcing pipe fitting for branch pipe connection. It has the advantages of safety and reliability, simple construction, improved medium flow channel, series standardization, and convenient design and selection.
HDPE clamp saddle is a reinforcing pipe fitting used for branch pipe connection. It can replace traditional branch pipe connection methods, such as reducing tees, reinforcing plates, reinforced pipe sections, etc., and is particularly suitable for the use of high-pressure, high-temperature, large-diameter, and thick-walled pipes. The design and selection of this pipe fitting is very convenient, which can effectively improve the safety and reliability of the pipeline system while reducing the complexity and cost of construction.
1. Good chemical stability: HDPE clamp saddle has good chemical stability and can resist the erosion of strong acids, strong alkalis and salts. This is because HDPE molecules have no polarity and therefore have excellent corrosion resistance.
2. Good temperature resistance: HDPE clamp saddle has good temperature resistance, with a softening point of 120℃-130℃, and can withstand hot water with an instantaneous temperature of up to 90℃-100℃, and adapt to various environmental temperature changes.
3. Good environmental protection: The material of the HDPE clamp saddle is high-density polyethylene, which is odorless and harmless, has good environmental protection, and meets modern environmental protection requirements.
Product name |
PP clamp saddle |
Sizes available |
DN25-250mm |
Pressure ratings at 20℃ |
PN10 bars |
Material used |
Saddle body in PP black co-polymer, nuts and bolts in zinc galvanized steel, o-ring gasket in NBR, reinforcing ring in AISI 430 |
Colors available |
Black, blue |
Standards follow to |
EN 712/713/715/911; ISO 3501/3503/3458/3459. |
Markings |
Customer’s logo can be stamped |
Samples available |
Yes, sample available for small quantity |
Packing method |
Cartons |
MOQ |
Negotiable |
Production lead time |
Depending on the order quantity. |
Warranty time |
30 years for normal using |
Payment term |
T/T or LC at sight |
FOB Port |
Qingdao, Tianjin, Shanghai, Chongqing |
Country of Original |
China |
PP compression elbows are supplied from DN20-DN110mm.
Specification |
Qty/ctn |
Package size |
G.W |
N.W. |
||
(mm) |
(PCS) |
(m) |
(m) |
(m) |
(KGS) |
(KGS) |
PP clamp saddle |
||||||
25×1/2″ |
200 |
0.44 |
0.33 |
0.33 |
30.00 |
29.40 |
25×3/4″ |
200 |
0.44 |
0.33 |
0.33 |
30.00 |
29.40 |
32×1/2″ |
200 |
0.44 |
0.33 |
0.33 |
30.20 |
29.60 |
32×3/4″ |
200 |
0.44 |
0.33 |
0.33 |
30.20 |
29.60 |
32×1″ |
200 |
0.44 |
0.33 |
0.33 |
30.20 |
29.60 |
40×1/2″ |
160 |
0.44 |
0.33 |
0.33 |
30.00 |
29.40 |
40×3/4″ |
160 |
0.44 |
0.33 |
0.33 |
30.20 |
29.60 |
40×1″ |
160 |
0.44 |
0.33 |
0.33 |
30.40 |
29.80 |
50×1/2″ |
150 |
0.44 |
0.33 |
0.33 |
29.60 |
29.00 |
50×3/4″ |
150 |
0.44 |
0.33 |
0.33 |
29.80 |
29.20 |
50×1″ |
150 |
0.44 |
0.33 |
0.33 |
30.00 |
29.40 |
63×1/2″ |
100 |
0.44 |
0.33 |
0.33 |
27.40 |
26.80 |
63×3/4″ |
100 |
0.44 |
0.33 |
0.33 |
27.60 |
27.00 |
63×1″ |
100 |
0.44 |
0.33 |
0.33 |
27.80 |
27.20 |
75×3/4″ |
80 |
0.44 |
0.33 |
0.33 |
28.40 |
27.80 |
75×1″ |
80 |
0.44 |
0.33 |
0.33 |
28.60 |
28.00 |
75×1-1/2″ |
80 |
0.44 |
0.33 |
0.33 |
28.80 |
28.00 |
90×3/4″ |
50 |
0.58 |
0.35 |
0.33 |
25.60 |
28.20 |
90×1″ |
50 |
0.58 |
0.35 |
0.33 |
25.80 |
25.00 |
90×1-1/2″ |
50 |
0.58 |
0.35 |
0.33 |
26.00 |
25.20 |
90×2″ |
50 |
0.58 |
0.35 |
0.33 |
26.20 |
25.40 |
110×1/2″ |
30 |
0.58 |
0.35 |
0.33 |
25.30 |
24.60 |
110×3/4″ |
30 |
0.58 |
0.35 |
0.33 |
25.50 |
24.80 |
110×1″ |
30 |
0.58 |
0.35 |
0.33 |
25.70 |
25.00 |
110×1-1/2″ |
30 |
0.56 |
0.44 |
0.33 |
25.90 |
25.20 |
110×2″ |
30 |
0.56 |
0.44 |
0.33 |
26.20 |
25.40 |
110×3″ |
30 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
125×1″ |
10 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
125×1-1/4″ |
10 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
125×1-1/2″ |
10 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
125×2″ |
10 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×3/4″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×1″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×1-1/4″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×1-1/2″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×2″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
160×3″ |
6 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×3/4″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×1″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×1-1/4″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×1-1/2″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×2″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
200×3″ |
4 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
250×3/4″ |
3 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
250×1″ |
3 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
250×2″ |
3 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
250×3″ |
3 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
250×4″ |
3 |
0.56 |
0.44 |
0.33 |
26.50 |
25.70 |
JUNNUO supplies PP compression fittings of various sizes from DN20mm to DN110mm. PP compression fittings include: PP compression flange, PP compression steel, PP compression reducer, PP compression ball valve, PP compression direct, PP compression elbow 45 degrees, PP compression elbow 90 degrees, PP Compression male elbow, PP Clamp Saddle, PP Compression female elbow, PP Compression male tee, PP Compression Female Tee PP Compression Reducing Coupling and so on. Can be customized according to requirements, our PP compression parts are made of high quality PP-B, mainly used in HDPE water, oil and gas pipeline systems.
PP compression fittings are fully compliant with EN 712/713/715/911; ISO 3501/3503/3458/3459.